Thermostat Settings: A Year-Round Guide
The best thermostat settings follow one simple idea: the smaller the gap between your indoor and outdoor temperature, the less your system runs and the less you pay.
That means a higher setting in summer and a lower one in winter than most people use, with changes for sleep and time away. Here is the full year, from schedules to common mistakes.
Set 78°F in summer and 68°F in winter when you’re home and awake. Then let the temperature drift when you’re asleep or away: about 85°F in summer and 60–62°F in winter. Each degree closer to the outdoor temperature can save roughly 3 to 5 percent.
Recommended Thermostat Settings at a Glance
The Department of Energy’s baseline is 78°F in summer and 68°F in winter when you’re home and awake. Treat these as starting points, not rules.
| Situation | Summer | Winter |
|---|---|---|
| Home and awake | 78°F / 25.5°C | 68°F / 20°C |
| Sleeping | 78°F or slightly higher* | 65°F / 18°C |
| Away (short) | 85°F / 29.5°C | 60–62°F / 16°C |
| Away (extended) | 85°F, don’t turn off | 55–60°F / 13–16°C |
*Summer sleep is a tradeoff between energy and sleep quality, covered below.
These numbers are a balance point, not a comfort mandate. The principle matters more than the exact figure: move your setting closer to the outdoor temperature whenever you reasonably can, especially when you’re asleep or away.
The Principle Behind the Numbers
Every degree closer to the outside temperature reduces your system’s workload.
In summer, raising the setting means less cooling. Roughly each degree higher saves 3 to 5 percent on cooling. In winter, lowering the setting means less heating, with similar savings per degree. Results vary by home and climate.
This is why the same house costs different amounts to hold at the same temperature in different seasons and climates. It’s also why setbacks work. A setback lets the temperature drift while you sleep or are away, so the indoor and outdoor gap shrinks for those hours.
This guide covers the whole year. For summer numbers and humidity, see our guide on the best AC temperature for summer. For the emergency heat switch, see the EM heat setting.
Summer Thermostat Settings
The short version: 78°F when home, higher when away, and a personal choice at night.
Because we cover this in depth elsewhere, here are the essentials. Our guide on the best AC temperature for summer has the full treatment, including the role of humidity.
Home and awake: 78°F as a starting point. Adjust down only if you’re truly uncomfortable, and check humidity first, since a humid 78°F feels worse than a dry one.
Sleeping: 78°F or a little higher saves the most. Many people sleep better a bit cooler, so choose the setting that lets you rest well.
Away: raise to about 85°F. Don’t turn the system off entirely in humid climates, since the house collects moisture.
Ceiling fans let you set the thermostat several degrees higher for the same comfort, but they only help when you’re in the room.
If 78°F feels too warm, check your humidity before lowering the temperature. Humidity in the 40 to 50 percent range often makes a higher setting feel comfortable, which can cost less than cooling further.
Winter Thermostat Settings
The mirror image: lower is cheaper, and setbacks help.
Home and awake: 68°F is the DOE baseline. Many people are comfortable at 66 to 68°F with warm clothing.
Sleeping: 65°F or lower. A cooler bedroom supports sleep, and you’re under blankets, so the comfort cost is low while the savings are real.
Away: 60–62°F for normal absences. Go lower for extended ones, but not below about 55°F in cold climates, to protect pipes from freezing.
Don’t set the temperature so low during winter absences that pipes risk freezing. In cold climates, keep it at 55°F or above, and higher if any plumbing runs through uninsulated spaces. A frozen pipe costs far more than the heating you saved.
A Heat Pump Caveat
If you have a heat pump, large winter setbacks can backfire. Recovering several degrees quickly can force the system to use expensive backup heat, which eats the savings.
Keep heat pump setbacks modest, two to three degrees, or use a thermostat designed for heat pumps. Our guide on the EM heat setting explains the backup heat issue, and thermostat winter savings covers heat pump strategy.
Spring and Fall Settings
Mild weather is the easiest time to save, because your system may not need to run much at all.
When days are warm and nights are cool, opening windows can do the work. If you use Auto mode, the thermostat switches between heating and cooling on its own, which can waste energy when the two modes trade off in a narrow range.
A simpler approach is to choose Heat or Cool by hand and leave a few degrees of room, such as 68°F for heat and 78°F for cooling, so the system rests in between.
Building a Thermostat Schedule
A programmable schedule captures the savings automatically, which matters because manual adjustment relies on remembering.
A Typical Weekday Pattern
| Time | Summer | Winter |
|---|---|---|
| Wake (6–8 am) | 78°F | 68°F |
| Leave for work (8 am) | 85°F | 62°F |
| Return home (5–6 pm) | 78°F | 68°F |
| Sleep (10–11 pm) | 78°F+ | 65°F |
Adjust the times to your real routine. The savings come from the away and sleep periods, so those are the ones worth getting right.
Key Programming Principles
Use the setback periods. The away and sleep blocks are where a schedule earns its money. A schedule that holds one temperature all day saves nothing.
Account for recovery time. Set the system to start returning to comfort before you wake or arrive, so the house feels right when you get there.
Separate weekday and weekend schedules. Most programmable thermostats allow this. Your weekend routine is usually different from your workweek.
Don’t over-schedule. Frequent small changes can cause more cycling than they save. A few well-placed transitions work better than many.
Types of Thermostats
What you have determines what’s possible.
Manual. You set it and it holds until you change it. Simple and reliable, but savings depend on you remembering to adjust it.
Programmable. You set a weekly schedule and it follows it. This captures setback savings automatically. The common failure is setting it once and never improving it, or overriding it constantly.
Smart. Adds phone control, pattern learning, geofencing that adjusts based on your location, and energy reports. These features are useful, though the savings over a well-used programmable thermostat are smaller than marketing suggests.
Smart thermostat savings claims usually assume you weren’t adjusting your thermostat before. If you already use setbacks with a programmable model, upgrading saves less than the advertised figures. The biggest gains go to people moving from “set it and forget it” to any kind of scheduling.
Smart Thermostat Features Worth Using
If you have a smart thermostat, these features deliver the real value.
Geofencing. Adjusts automatically when your phone leaves or approaches home, handling irregular schedules that a fixed program can’t.
Remote adjustment. Move the system toward comfort before you arrive from an unexpected trip, or fix a setting you forgot.
Usage reports. Seeing when your system runs helps you find waste.
Gradual recovery. Better models bring the temperature back gradually and start early, which matters especially for heat pumps.
What to be skeptical of: learning features that override your preferences in ways you didn’t intend. If yours makes choices you disagree with, check whether a schedule or eco mode is overriding your manual settings.
Fan Setting: Auto or On?
Most thermostats offer an Auto fan setting and an On setting. Auto runs the fan only while the system heats or cools.
On keeps the fan running all the time. That can even out room temperatures, but it uses more electricity. In humid summers it can also push moisture from the coil back into the house. Auto is the better default for most homes.
Common Thermostat Mistakes
These habits quietly raise bills and wear out equipment.
Myth: setting the thermostat to an extreme temperature makes the house heat or cool faster. Your system works at a fixed rate. Setting 60°F when you want 72°F in summer doesn’t cool faster, it just overshoots and wastes energy.
Cranking the heat to warm up quickly. Same logic in winter. Setting 78°F when you want 70°F doesn’t heat faster and often triggers expensive backup heat on a heat pump.
Never using setbacks. Holding one temperature around the clock gives up the easiest savings available.
Large heat pump setbacks. As covered above, these can cost more than they save by triggering backup heat.
Ignoring thermostat placement. A thermostat in direct sun, above a lamp, near a supply vent, or on an exterior wall reads the wrong temperature and makes the whole system respond to bad information.
Fighting between household members. Constant manual overrides defeat a schedule. Agreeing on a program works better than a thermostat war.
Closing vents to compensate. If some rooms are uncomfortable, closing vents elsewhere isn’t the answer. It raises system pressure and can cause short cycling and coil freezing.
Thermostat Placement
Placement is worth its own note, because a bad spot undermines every other setting.
Your thermostat measures temperature at one spot and assumes it represents the house. Bad locations feed it bad data:
- Direct sunlight makes it read warm, overcooling in summer
- Near a supply vent makes it read whatever the system just produced
- Above electronics or a lamp makes it read warm
- On an exterior wall makes it read closer to the outdoor temperature
- In a hallway measures a space that heats and cools differently from living areas
The ideal spot is an interior wall in a frequently used room, away from direct sun, vents and heat sources, at about eye level. Moving it means running wire, which is usually a technician job, but it’s worth it if yours is poorly placed.
When to Call a Pro
Most settings are easy to change yourself. Call a licensed technician when the problem looks bigger than a setting:
- The thermostat is blank or unresponsive after you replace the batteries
- The system runs constantly and never reaches the temperature you set
- The system turns on and off in short bursts, a sign of short cycling
- Backup heat runs often on a heat pump, even in mild weather
- You want to relocate or replace the thermostat and need new wiring
- Some rooms stay too hot or cold no matter what you set, which can point to airflow or duct problems
Regular tune-ups also help your thermostat settings work as intended. See our guide on HVAC system maintenance for a simple yearly routine.
Frequently Asked Questions
What are the best thermostat settings to save money?
78°F in summer and 68°F in winter when home and awake, with setbacks when asleep or away: about 85°F in summer and 60–62°F in winter while out. Each degree closer to the outdoor temperature saves roughly 3 to 5 percent on heating or cooling.
What temperature should I set my thermostat in winter?
68°F when home and awake is the Department of Energy baseline, dropping to around 65°F for sleep and 60–62°F when away. In cold climates, don’t go below 55°F during extended absences, to protect pipes from freezing.
What temperature should I set my thermostat in summer?
78°F when home and awake, and about 85°F when you’re away. Check humidity too, since drier air makes a higher setting feel more comfortable.
Do programmable thermostats really save money?
Yes, when used properly, because they capture setback savings automatically instead of relying on you to remember. The savings come from letting the temperature drift while you’re asleep or away. A programmable thermostat that holds one temperature all day saves nothing.
Are smart thermostats worth it?
They offer useful features like geofencing, remote control and usage reports. But the energy savings over a well-programmed conventional thermostat are smaller than marketing implies. The biggest savings go to people who weren’t using any schedule before.
Does setting the thermostat higher or lower make it heat or cool faster?
No. Your system runs at a fixed rate regardless of the setting. An extreme temperature just makes it overshoot your target and waste energy. On a heat pump, cranking the heat can also trigger expensive backup heat.
Where should a thermostat be located?
On an interior wall in a frequently used room, away from direct sunlight, supply vents, and heat sources like lamps or electronics, at about eye level. A poorly placed thermostat reads the wrong temperature and makes the whole system respond incorrectly.
Should I lower the heat at night with a heat pump?
Only modestly, two to three degrees. Large setbacks force a heat pump to use expensive backup heat to recover, which can cost more than the setback saved. A thermostat designed for heat pumps handles gradual recovery better.
What should I set my thermostat to when on vacation?
In summer, about 85°F with the system still running to control humidity. In winter, 55–60°F to protect pipes while limiting heating. Never turn the system off entirely in extreme weather, since the recovery and possible damage can outweigh the savings.
Should my thermostat fan be on Auto or On?
Auto for most homes. It runs the fan only while heating or cooling, which uses less electricity. On can even out room temperatures but costs more to run.
Bottom Line
Set 78°F in summer and 68°F in winter when you’re home, then let the temperature drift when you’re asleep or away. Those setbacks are where the savings live.
Use a programmable or smart thermostat to automate the pattern, since the benefit depends on the changes actually happening. Program recovery to start before you wake or arrive, so comfort isn’t sacrificed.
Two cautions: keep heat pump setbacks modest to avoid expensive backup heat, and never set winter temperatures so low during absences that pipes risk freezing. Start with the settings in the table, then adjust to what feels right in your home.